Epson Workforce WF-7520 Network Connect Setup
- Firstly, Download and Install the Epson Workforce WF-7520 Connect Printer Setup Utility.
- Then, Accept by agreeing the End-User License Agreement, and tap the next button.
- Click on Install, and Finish the Installation Process.
- Now, Select Printer name as “Epson WF-7520 Printer,” and click on the Next.
- After that, Select Epson Workforce WF-7520 Printer Registration, and Press next.
- Choose Agree and Click next.
Wireless Network Setup Using Epson WF-7520 Control Panel
You may Select & Change Wireless Network Settings with the use of Epson WF-7520 Printer Control Panel. To get Install Epson WF-7520 Printer
on a Wireless Network, just follow Setup Instructions on a Start Here Sheet . Then Install Driver that is needed for Epson WF-7520 Printer setup
by Downloading from the epson.com/support. The Epson Workforce WF-7520 Installation Steps will guide you via the Network Setup.
- Touch the Home icon button, if it is necessary.
- Then, go to Network Connection Settings and Click Wi-Fi recommended and Wi-Fi Direct.
- From that Choose the Wi-Fi (recommended).
- Tap Start Setup or else Change Settings.
- Choose Wi-Fi Setup Wizard (WSP).
- Pick out the name of your Wireless Network or Enter Manually Network Name Manually on Epson Workforce WF-7520.
- Choose the Network Password Field and type your Wireless Network Password by using the displayed keypad.
- You have to enter the Password in Uppercase and Lowercase Letters, and Special or Numeric Characters.
- Touch left or right arrows to get move the mouse cursor.
- To get change the Case of Letters, touch this ⇑ icon button.
- Touch this icon button to Delete the Previous one.
- To Enter the Symbols and Numbers Click button.
- Click the OK button after entering your Network Password.
- Make sure the displayed Network Settings and click Start Setup to Save.
- If you wish to print the Network Setup report, Choose Print Check Report, Otherwise touch OK button to move.
- Click the Home button icon to come out from this page. Now, this icon button will display on the LCD Screen and it will connect to Epson WF-7520 directly from your computer device then print.
- Be sure that you had done Epson Workforce WF-7520 Driver Installation to print from computer.
- If you are not able to see this icon, you had Selected your Network Name wrongly or you had entered the Password Incorrectly. Once, again repeat these same above Mentioned Steps to try again.
Wireless Protected Setup of Epson WF-7520
If you use Epson WF-7520 Wireless Protected Setup that is enabled to Access Point or Wireless Router, then only you can Connect
Epson WF-7520 Printer quickly to your network by using the WPS. To get know how to utilize Wireless
Protected Setup While Connecting a Network, Follow the below Steps
Epson Workforce WF-7520 WPS to Connect a Network
If you are having the WPS-enabled Wireless Router, use the Wireless Protected Setup (WPS) to link Epson WF-7520 Printer to the network.
- Go and Click the home icon button.
- Network Connection Settings will display, Choose the Wi-Fi (Recommended) Network Connection.
- Touch Push Button Setup (WPS).
- Just keep following the On-Screen Instructions on the Epson Workforce WF-7520 LCD screen to finish the WPS WF 7520 Setup Process.
- At last, Press the home icon button to get exit from the Network Page.
If you have any doubts on Network Setup for Epson WF7520 Printer, Go to Epson wf-7520 Printer Network Setup to get more knowledge.
Have you Face Epson WF 7520 Printing related Issue?
Our Professional Experts will Give you the Guidance & Support
For your Epson Printer Issues Call us
Toll-Free @ 1866-366-0486
Enable Epson Workforce WF-7520 Wi-Fi Direct Mode
- Tap on the Home icon button.
- Click the Wireless (Wi-Fi) and Wired (Ethernet) Network Connection.
- Select Wireless Wi-Fi (recommended) from the Network Connection Settings.
- Choose Start Setup.
- To get Select the Wi-Fi network name (SSID) use the Wireless Device or your computer that is displayed on LCD Screen, and type the Password that is shown in display.
- To get back from this page, Touch the Home Screen button.
Wi-Fi Network Settings Using Epson Workforce WF-7520 Control Panel
Users can Setup the Network by using the control panel of WF-7520 Printer. To Configure the Wi-Fi Network Settings
From Epson WF-7520 Printer Control Panel Follow the Instructions that are Displaying below
- Click on the Home button icon.
- Tap the Wireless and Wired icon button.
- Prefer Wi-Fi (Recommended).
- Pick Change Settings or Start Setup.
- Choose the Epson WF 7520 Wireless Setup Wizard (WSP).
- Select Wireless Network Name or else Enter Network Name Manually.
- Tap the Password filed and Register your Wireless Network Password by using the displayed keypad.
- While entering the Network Password use the Upper and Lower Case Letters and Numbers or you can use the Special Characters.
- To get move on the Cursor, Touch the Left arrow or Right arrow.
- Touch the Up-arrow icon button to edit the Case of Letters.
- To erase the Previous Character, Click the Cross Symbol Cancel button.
- Enter Symbols and Numbers, and tap on the Press button.
- Touch OK button, After entering your Network Password.
- Make sure the displayed Network Settings and choose Start Setup to get save.
- If you want a Network Setup Report to Print, Touch the Print Check Report or else Tap OK button.
- Finally, Click on the home icon button to get back.
Disclaimer: epson-printers.org is an Independent Service Provider for all printer models and brands. We do not promote or market Epson Printers on our website. Read the Terms & Privacy on our website before making a call to us. All the contents, names, images, videos, trademarks, mentioned on this website are only for reference and to furnish information of the customers. The Printer Driver for Epson WF-7520 could also be downloaded from epson.com/support/epson-wf-7520 or Epson WF 7520 Driver